Parametric Stool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bar stool made from round stock and plastic couplings.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
I needed a stool for my unusually high bar table. None of the offerings were high enough, so I made my own, inspired by Alexandre Chapelle’s design.
The diameter of the round stock can be edited, but I went with 28mm since that's what my local hardware store had.
Required parts:
Seat bracket x3
T-bracket x3
Center bracket
Additional materials:
A seat to screw into
Round stock
4mm by 20mm wood screw x21
All parts are oriented for printing, no supports needed.
Since the parts have hollow cylinders that require good overhangs, PLA is recommended, I used 5 walls and the stool is very sturdy.