Filler Spool Holder 360deg Rotating Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows you to attach your existing spool holders to a stand or mount in various orientations
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
While setting up my enclosure, I wanted an easy way to use the same spool holder upside-down, as well as upright. I found the Filler Filament Holder and designed a rotating adapter, all while being able to keep using the Filler prints that are already finished.
https://www.printables.com/model/174620-filler-filament-holder
No supports required
PETG or better suggested for strength
Requires a single M3x5x4 heat-set insert and M3x10mm screw. The insert goes in the back of the “insertable” portion of the 2 pieces. The screw is inserted from the “inside” of the receiver, with the “insertable” section away from the receiver (insert will be on the .