Quansheng Belt Clip Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip for mounting new accessories to the Quansheng UV-K6 (probably K5 as well)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed out this morse code key to see what all the fuss was about with the Quansheng CW craze. This little key seemed like it would work great, but I just needed a way to firmly attach it to the radio. I made this clip that you can glue (I prefer 2 part epoxy) to the key's base. Now I can slide the key right onto the radio and pound away. Hopefully you can use this to build your CW capable or other Franken-sheng and we can have a QSO some day.
Print it with the larger flat side down. That larger side is what slide into the radio slot, so when you glue this clip to your accessory, make sure to glue it to the smaller side. It should fit snugly into the radio, but you may need to tweak your printer's settings depending on material and calibration (I used PLA on an X1 Carbon).