Kitchen Sink Organizer Which Holds Sink Strainers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Chris (Aero) Engineering Design's sink organizer which adds straw brush holders and sink strainer holders.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 436
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of Chris (Aero) Engineering Design's sink organizer which adds straw brush holders and sink strainer holders.
Added side compartments on both sides to hold straw cleaning brushes, as well as two cutouts and support ledges to hold sink strainers that are not in use as well. Special thanks to Chris to providing the STEP file that I was able to easily edit in Solidworks to create this version!
Includes a file for a TPU foot design I used in the front to level, as my sink has a ledge which requires the front to be raised and supported. Scale as needed. Designed to use CA glue on the center rectangular section and capture any excess in the trough area to prevent excess CA glue from running out onto the model's surface.
Printed in Prusament Galaxy Black PETG on my Prusa Core One, settings below:
Prusament PETG stock profile
4 walls, 4 top and bottom solid layers
Rectilinear infill, 25%
Balanced 0.20mm print profile on a 0.4mm CHT HF nozzle
Files Included:
STEP for the main body
3MF for the main body
3MF for a TPU foot design I used in the front to level, as my sink has a ledge which requires the front to be raised and supported. Scale as needed. Designed to use CA glue on the center rectangular section and capture any excess in the trough area to prevent excess CA glue from running out onto the model's surface.