MKE2-EW Lav mic concealer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Conceales a lavalier microphone and minimizes noise from clothes.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Dimensions based on the Sennheiser MKE2-EW. No idea if it works with others. Conceales a lav mic and minimizes noise from clothes.
Print Settings:
- Rafts: No (Didn't need a raft on a PEI plate, YMMV)
- Supports: No
- Resolution: 0.20
- Infill: Fill with walls or 100%
- Filament material: TPU
- Notes: Picture and only test with PLA, and I'd presume TPU to be the best for this. PLA did scratch against clothes a little bit but still better than nothing. TPU is probably great for this but don't have any yet. Comment your experience please.
Post-Printing:
I used a 0.8mm thick paperclip, bent it into the correct shape (& cut the "legs" at 5-6mm) and just press-fit it into place. Don't push it as far in as in the picture, maybe 1mm higher up. You can heat up the paperclip with a lighter to melt the plastic but I found this to be difficult to succeed. The holes are designed 1.1mm and a 0.8mm paperclip had a good press-fit. No idea if this will work with TPU though. Maybe just make the holes smaller and let the TPU bend out?