NP-F battery holder with dovetail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Piece that is compatible with cedricheckly's / GrandCedre's dovetail system, and will hold an NP-F battery
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pair this part with one of the female pieces from Alexandre Valentim's / GrandCedre's system (find more for it in "Model origin" and in my profile), and then you can attach an NP-F to all kinds of stands, superclamps, robocups etc.
I like to have one spare NP-F battery for my focus pulling monitor on my stand with this. Note that you might need to add some electric tape or gaff tape in the male dovetail to add enough friction to the connection. I just wrap Advance electric tape around the whole male part.
PLA or PETG works fine. Print in the orientation shown in the screenshot, with supports. You want the big surface to be parallel to the layer lines for strength. And having it upside down to that would probably cause inaccuracies in the parts connecting to the battery, and an uneven surface because of supports.
Also check out my profile for more pieces that work with Alexandre Valentim's / GrandCedre's system.