GraphGear 1000 Custom Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GraphGear 1000 Custom Parts made by fixfell7 Check below for slicer settings !!!
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 1058
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
GraphGear 1000 Custom Parts made by fixfell7
Check below for slicer settings
!!! for "GraphGear-1000_Inner.STL".
Need to drill a 7/32 hole for the big hole side
!!! Need to drill a 13/64 hole for the small hole side
The "GraphGear-1000_RotringTip(1.5).STL" has about the same proportion of the Rotring 600.
Also don't know if 1mm Tip version work. to test
Reference: https://www.reddit.com/r/mechanicalpencils/comments/6qhzgg/more_custom_pieces_for_the_gg_1000_suggested_by/ https://www.reddit.com/r/mechanicalpencils/comments/6p4t40/custom_machined_the_part_that_always_breaks_on/ https://www.thingiverse.com/thing:3752878
Print Settings
Supports:
Yes
Resolution:
0.2
Notes:
Used Cura 4.8
Other Print Settings:
- Print Thin Walls: on
- Print Speed: 40mm/s
- Support Structure: Tree
-Tree Support Branch Angle: 8°
- Support Overhang Angle: 75°
- Support Z Distance: 0mm
- Support Roof Density: 100%
- Build Plate Adhesion Type: Brim