Eartip case for IEMs - Usable on flights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can be used on aircraft and no magnets needed. Uses a pressure clip system.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by multiple makers on this site!
- Pleomin
- Lucas
- S_G
I wanted to design a case with a slightly stronger hinge and is more specific for my use case (no pun intended) and multiple requests to upload it here on the site! There are two vents on the bottom of the case to allow use in flights so the case doesn't pressurise! Yes, this does happen.
It uses a pressure lock system, so you press in the middle section and pull the two sides to release. It takes a bit of getting use to, but it works very well imo! Requires x4 m2 8mm countersunk screws for a reinforced hinge (Do not screw in too tight, it may split the plastic). Thats all for 3rd party components.
And ear tips to fill it :v