27 Inch iMac USB Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using this hub as a base: https://www.amazon.com/dp/B0BRNG1XPDI intend to convert a 5k iMac into a monitor. This is…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Using this hub as a base: https://www.amazon.com/dp/B0BRNG1XPD
I intend to convert a 5k iMac into a monitor. This is one piece in a larger puzzle to make the iMac into a docking monitor.
If you look at the images; you can tell that the pcb for the controller is bent, although unfortunate it seemed like the best off the shelf option.
I've designed these parts to reduce the strain as much as possible, while also still holding the board in place. (Without irreversible modification to the iMac)
The holder is designed to hold the curve required to fit in the iMac's ports. The support is designed to give little pressure to let usb devices be plugged in without the board falling.
Category: Gadgets