Giant Checkered Sitting Rabbit, two nozzle sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BBprintsthings's charming Sitting Rabbit--this is code for a painted version for the multi-tool XL.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
I am sharing the gcode I worked out for this multi-tool painted model, that started with BBprintsthings's very good Sitting Rabbit print. I made a larger and smaller version, and there is no problem at all with the scaling. I've included files for PETG and for PLA in both sizes.
The big rabbit is 10.5" tall. The little one is 3" tall. These were done with the .6mm nozzles that came on the XL, and the detail was still very good. No particular filament is necessary; I used what we had on hand: ordinary white PLA, a black silk PLA, and matte brown.
I have now included code to run the smaller rabbit with .4mm nozzles. The markings are a bit different, but it's still a Giant Checkered rabbit. I ran this one with a Vanilla Bean PLA Jessie filament in place of the white. The detail comes out super nice with the smaller nozzles.