Bosch FSN Rail Adapter for Amazon Basics Clamp (Improved)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved design that allows use of original nut and hand screw
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The original required me to file something off and used a separate screw and nut.
I wanted to use the original nut and hand screw that was on the clamp (and I didn't want to damage my clamps), so I edited the model to make use of those.
Print flat for speed and to test fit, probably not the best for strength because the clamping forces will be on the layers, so for strength I printed it upright with tree supports. Use a brim if you have adhesion issues.
The object in the image was printed with PETG-CF at 0.12mm layer height and 4 walls. Took about 1.5h on my ECC.The original required me to file something off and used a separate screw and nut.
I wanted to use the original nut and hand screw that was on the clamp (and I didn't want to damage my clamps), so I edited the model to make use of those.
Print flat for speed and to test fit, probably not the best for strength because the clamping forces will be on the layers, so for strength I printed it upright with tree supports. Use a brim if you have adhesion issues.
The object in the image was printed with PETG-CF at 0.12mm layer height and 4 walls. Took about 1.5h on my ECC.