Kyosho Mclaren 12C Display Base (Top Gear Theme)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A base for Kyosho Mclaren 12C, it should work with all Kyosho Mclaren 12C releases.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 595
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Custom display base are also available from $5! Contact me to discuss what you want!
If you like my work, you can support me Printables Clubs! Just click the “Support & Join” button beside my name or here: https://www.printables.com/@GigaPenguin#join:279
Exclusive models are included too!
You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts
Description
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Name plate (NamePlateAssem.STL)
2) Base (BaseV2.STL)
3) Base back wall (BoxBackAssem.STL)
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BoxBackAssem":
1) Start (colours of the roads around the map, mine is in grey)
2) Layer 13 (Grass area of the track map, mine is in green)
3) Layer 18 (Top Gear "Gear" colour, mine is in blue)
4) Layer 23 (Colours for all lettering, mine is in white)
5) Layer 28 (Track map route colour, mine is in orange-ish golden)
6) Layer 33 (Mclaren symbol, arrows on tire wall and start, mine is in red)
Filament change layer for colours on "NamePlateAssem":
1) Layer 10 (Top Gear "Gear" colour, mine is in blue)
2) Layer 15 ("Top Gear" and "Test Track", mine is in white)
Colours
Colours of all other items is your choice.
Assembly
The car is screwed back using the original screw from Kyosho.
Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.