Aqara Zigbee Temperature Humidity sensor radiation shield + AA battery holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anti-radiation shield to allow the Aqara Temperature & Humidity sensor be used outdoors. Has room for a AA battery pack.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Disclaimer
This does not work well at protecting from solar radiation. The temperature on this day did not exceed 72 °F, but the sunlight hitting the wall behind it created a top temperature of 89 °F. I would only suggest using this in a totally shaded area.
Description
This is a solar radiation shield for the Aqara Temperature/Humidity sensor which also allows for the use of AA batteries for a much longer battery life. It's been simplified for easier printing. It's been improved from the earlier model to be easier to print and assemble.
Original upload had a battery spot that was 2mm too narrow for the listed battery pack. The only change is to cover.stl, if you've already printed it you do not need to re-print anything else.
BOM
- 1x of each part except for
shield_side - 5x
shield_side - Aqara Temperature Humidity Sensor Zigbee Smart Air Pressure Environment Sensor - (AliExpress, original author's affiliate link)
- 1x double LR4(AA) battery holder (AliExpress, non-affiliate)
- 4x M3 x 75mm bolt (AliExpress, non-affiliate)
- silicone glue to connect aquara_main.stl and sensor (AliExpress, original author's affiliate link)
Assembly