Practice Golf "Ball" (Tapered Asymmetrical Cylinder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Iteration in a series of practice golf balls designed for full power strokes with limited distance, on purpose :).
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Firstly, I made this model with the intention of printing in ASA. Then I saw TeePU Eagle Ball, which I can recommend as a great practice ball printed in TPU! I would not print this in PLA or PETG, or really anything other than ASA or TPU. My ASA prototype has taken some serious hits and the other model in TPU is resilient in that TPU way …
The outer shape is an even cylinder, symmetrical top to bottom. The inner space is conical and corrugated.
The prototype in the picture is about 5mm taller than the final model. I printed it in ASA with 5 walls and 5 top/bottom shells. I went with 15% gyroid which gave a final weight a bit under 30 grams for that print. This model, printed with same walls/shells but 5% infill came in at about 24.4 grams.
Keep in mind a golf ball is just under 46 grams. With all the variables available with 3D printing, you could adjust this heavier or lighter to get different effects. The main goal, of course, being to achieve the shortest hits possible LOL.