CTEK MXS 5.0 Charger Carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the design of the MXS 10/MXS 7 holder, but my MXS 5.0 is smaller in size. I also wanted to have more…
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 186
- Wydruki
- 1
- Wyświetlenia
- 1791
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I liked the design of the MXS 10/MXS 7 holder, but my MXS 5.0 is smaller in size. I also wanted to have more substantial brackets for winding the cables and a place to clip the cable clamps. Because the MXS 5.0 is smaller, I was able to combine the two-piece base of the larger design into a single piece, which makes it stronger. I added a handle with a notch to hang on a nail or screw.
I was going to redesign the whole thing in Fusion 360 but then realized it was simpler and quicker to just modify and join the existing pieces in TinkerCad.
Print one of the Charger Cable Holder, one of the clamp bar, and two of the cable holders. The fit for the cable holders was pretty tight on mine, but I was able to force them in with some light tapping with a small hammer.
I printed it in ASA at 0.2mm, 30% gyroid infill.
Category: Tool Holders & Boxes