Sensecap T1000-E charging cradle modified for magsafe sticker and chaining multiple together
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added a linkage mechanism so multiple chargers can be stuck together, and a recess for a magsafe sticker on the T1000-E.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 642
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The peanut style linkage mechanism allow you to stick multiple of them together, handy for charging multiple T1000-E cards at once. You need two peanut connectors for each connecting edge. So for two chargers you need two connectors, for three chargers you need four connectors, and so on. These connectors are designed with zero tolerance gap, which works well on my P1S, but you might need to slightly shrink or expand them in the slicer if your machine prints a little different than mine. I also included the STEP and f3d files if you'd rather change the tolerances in the model itself.
The recess in the charger is to allow a magsafe sticker to be placed on the T1000-E, which then allows it to stick to a magsafe compatible phone case or phone mount. I used these tiny magnet stickers, but the simple metal rings should work too. With the magnets I used, the card sticks to the back of my phone very securely. The metal rings should stick nicely to a magsafe phone mount, but might be a bit weak on the back of a phone.
I also slightly tweaked the hole for the magnetic cable end so it prints a little better without supports.