BetaFPV VR03 Goggle Prescription Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lens holder for a very specific lens. Uploaded mainly as a concept because the lens was made for a specific frame.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
The BetaFPV VR03 face hole is too narrow to work with all or most glasses.
It is feasible to grind down old glasses lenses using a padded clamp and a sander with 80 grit paper.
The original model was based on the observation that a small plastic insert will happily stay locked in position inside the face hole.
To fit inside the 100mm face hole I had to grind about 7mm off the side of both lenses.
Most of my lenses are 50mm wide. After aligning optical centres, these lenses are too wide for the frame so I had to grind down the sides.
Unfortunately this is not a universal solution, but hopefully someone will find it useful and enjoy their VR03 with normal vision.