Daedric Claymore from Oblivion (thickened blade)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Daedric Claymore from TES 4 Oblivion, but thicker blade
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
UPDATE: Reworked the joints and uploaded the better version of a 6-split under the names 1,2,3,4,5,6.stl :D these ones stick MUCH better and shouldn't require glue (depends on your resolution and what you intend to do with it; I added some epoxy resin just to keep it in place, but the joints alone hold well enough for just a showpiece)
This is a modified version of the Daedric Claymore from Oblivion with a thickened blade (the default one is way too thin). Extracted the .NIF from the game files, removed unecessary parts and converted to .OBJ and then converted it to .STL
the "daedric claymore.stl" is the full model, the "claymore_2" is for a 2-split print with small dovetails and the "claymore_4" is a 4-split with big dovetail joints
The joints for the smaller split are a bit tight, while the ones on the big split are a bit loose. Try using superglue or epoxy