Voltmeter or Temperature Display Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking for an enclosure/holder for a voltmeter and temperature display, but couldn't find anything existing…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I was looking for an enclosure/holder for a voltmeter and temperature display, but couldn't find anything existing that was what I was looking for. I built these to screw onto the side of my printer enclosure (Stuva cabinet from IKEA).
To install, just snap the display into the enclosure and screw the enclosure onto whatever surface you'd like. I drilled a hole to run the wires through and then installed the display, so the hole is hidden.
The displays I purchased and used were:
Voltmeter: http://www.dx.com/p/203339
Temperature: http://www.dx.com/p/417909
They are identically sized, obviously.
Print Settings
Printer Brand:
RepRap
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%
How I Designed This
Modelled in 123D Design. I have included the .123dx file, so you can modify it as you see fit.
Category: Electronics