Flashforge Adventurer 5m Camera housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera mount for those who want a super cheap solution
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 774
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to add a camera to my ADM5, but didn't want to spend $40 on the official camera (I hear it pretty bad)
So, I found the following camera on Amazon for $10 and created a mount for it. This camera is basic.. if all you want to see is that your print is actually printing, that this is for you. It has 2 holes in the bottom for magnets. The camera will hold fairly snuggly in the recess of the hole.
The only fiddly part is getting the camera in focus. I recommend grabbing a laptop/tablet, bringing up the camera and turning the lens until it's in focus. Takes less than 2 mins.
Camera link
https://www.amazon.com/dp/B08MXVDY2B?ref=ppx_yo2ov_dt_b_fed_asin_title