Axis P12 MkII IP Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We needed to retrofit a Axis P12 Camera into an existing elevator enclosure which used a 40mm box camera like whats…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
We needed to retrofit a Axis P12 Camera into an existing elevator enclosure which used a 40mm box camera like whats found in an ATM. This is my first real attempt at using printed threads, but they came out wonderfully. I put 3 positions to mount the camera to the side mounting posts found in the existing enclosure, they are sized to use M3 screws I tapped them out to get the fit just a bit better. Axis makes other cameras with the same form factor so you may be able to use it for your application too.
Dimensions 40mm x 48mm x 30mm
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Supports:
No
Resolution:
.1mm
Infill:
20%
Notes:
3 perimeters to get the threads to print better.
Category: Office