Dreamcast USBGDRom 2.5" HDD Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 5/16/18: New version with different HDD spacing, you will also need: M3 x 4mm x 4.3mm Brass Knurled Threaded…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Update 5/16/18: New version with different HDD spacing, you will also need:
M3 x 4mm x 4.3mm Brass Knurled Threaded Round Insert https://www.ebay.com/itm/391511806743 https://www.amazon.com/dp/B01IYWUUH8/
It officially works with this usb adapter requiring no modifications
Sabrent USB 3.0 to SSD 2.5-Inch SATA Hard Drive Adapter https://www.ebay.com/p/1042161662 https://www.amazon.com/dp/B011M8YACM/
This is the initial release of my custom USBGDRom mount with support to mount a 2.5" HDD under the main board. There is also an insert for the top shell to make no opening in the top of the unit.
Along with the parts you will need
A sata 2.5" bare hdd 7mm tall only
A super small sata to usb adapter like this: https://www.ebay.com/itm/2-5-SATA-Female-HDD-SSD-USB-2-0-To-7-15Pin-SATA-Adapter-Cables-Converter-Panel/122870273020
A usb 90 degree up cable like this: https://www.ebay.com/itm/USB-2-0-type-A-male-to-Mini-B-5-pin-right-Left-up-down-angled-male-cable-adapter/222723596233
6 M3x4mm screws (pc fine thread screws are perfect for this application)
Both parts will require supports.
Category: Video Games