GCMax Plug'N'Play GameCube HDMI and RGB Dongle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the final case design for the GCMax project that I worked on with Dan Kunz (Citrus3000PSI) I decided to take…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is the final case design for the GCMax project that I worked on with Dan Kunz (Citrus3000PSI)
I decided to take the a new approach on the case for the latest revision of the GCPlug project. Rather than having 4 separate pieces which make up the case I opted for making the case 2 pieces which attach with just two screws.
This case is not capable of being produced by a FDM printer, the entire case was designed with laser sintered nylon as the process for printing.
To complete the case you will need 2 M2x25mm flat head screws and 2 M2 nuts.
To complete the plug you will need a bare PCI connector(these can be found on ebay) as you will need to extract pins from the connector to insert into the plug.
Dan has shared his files and build instructions for the
PCB on OSHPark find them at this link: https://oshpark.com/shared_projects/UZZTO1KM
Please note that this project is not for the feint of heart, pining the connector is an arduous process, building the PCB will require exceptional skills with soldering.
Thank you Unseen for making all GCVideo based projects possible with your open source project.
Category: Video Games