USB-GDRom Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 1/14/18: I uploaded a modified version of my insert that has no bottom, it should print fairly quick and pair…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Update 1/14/18: I uploaded a modified version of my insert that has no bottom, it should print fairly quick and pair nicely with this mount. As of right now I have not tested it so it may get modified once I have time to print it.
3D printed mount for the USB-GDRom. This is designed to allow you to install a USB-GDRom without having to disassemble your disk drive. This allows you to leave your drive intact to be used in the future if you would like.
You will also need 4 M3x5mm screws to attach your USB-GDrom to the mount. The holes are sized for you to just tread the screw into the plastic.
This is compadable with my insert and the one made by Twistedsymphony
Print with the top surface towards your bed and use supports for the mounting locations.
I printed mine in ABS at .2mm layers and 20% infill.
Category: Video Games