Mercedes W124 Electronic Window Slide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Window holder on rail plastic part for Mercedes W124
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an unofficial, aftermarket 3D printable part designed to replace the small plastic block that connects the window glass to the rail of the electric window winder on the Mercedes W124.
° This model is not an original part and is not endorsed, sponsored, or manufactured by Mercedes-Benz.
° It is provided solely for personal, non-commercial use as a replacement component for a discontinued vehicle.
° No trademarks, logos, or brand markings are included in this design.
Use at your own risk — I take no responsibility for damage or injury caused by its use.
Print settings K1C
PLA
Support Normal(Auto)
0.4 nozzle 230° nozzle 50° bed