Odroid XU4 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wasn't happy with the available printable cases for the XU4 - so I designed this. I used four M3x25mm cap head hex…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 811
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't happy with the available printable cases for the XU4 - so I designed this. I used four M3x25mm cap head hex screws to assemble the case.
Update: Download HDMI version if you want access to the HDMI port.
Note 1: This is only sized to fit the XU4 with the OEM fan and heatsink. It will not fit the passively-cooled heatsink-only versions.
Note 2: The power button hole is deliberately sized to require a tool to push the button to keep it from being accidentally pushed. I can re-design this if there is any interest.
Note 3: I do not know if an eMMC module will fit in this case. If someone is interested and can provide measurements for how far the eMMC module sticks out, I can make a variant to accommodate that if necessary.
Thanks to Printbus for the use of [his] model of the XU4 to simplify measuring clearances and screw holes.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
0-25
Notes:
Flip the top piece so it prints flat side down.
Category: Computer