1 / 1
Plant Pot Feet Standoffs Triangle 70mm x 56mm — zdjęcie 1

Plant Pot Feet Standoffs Triangle 70mm x 56mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plant pot risers / feet to assit with drainage and stability.

Ocena
0 / 5
Polubienia
6
Pobrania
83
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Small plant pot feet/risers.  Trivial to make whatever size you need by resizing/scaling X and Y axis in the slicer.

I had a bunch of these from Amazon previously, so I recreated my own copy of them (original in photo). Can fit 15 on a standard Prusa Mk4/C1 bed.

Recommended settings: Uses less than 17g of filament.

Material, PETG or better (these usually sit outside)
Infil: Triangles @ 25% (you only need vertical stength)
Standard 2 perimeters is ok.
No supports needed.

 

Tagi