Printed Fractional Plates for 50 mm Barbel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY 3D printed fractional plates for 50 mm barbells – two-part design, fill with sand for customizable micro loads
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Public Domain
These 3D printed fractional plates are designed to fit a standard 50 mm Olympic barbell.
Each plate is made of two interlocking parts that can be easily filled with sand (or another dense material) to reach the desired weight.
To assemble, simply use 2.9 x 10 mm screws. For extra safety and to avoid any leakage of sand grains, I recommend applying a layer of duct tape around the joint after filling.
This solution is perfect for creating micro loads (fractional plates) at a very low cost, ideal for progressive overload and strength training when you need small increments in weight.
- Fits standard 50 mm barbell
- Two-part design for easy printing and assembly
- Fill with sand to adjust weight
- Assemble with 2.9 x 10 mm screws
- Optional duct tape for extra sealing
- Great for DIY fractional plates / micro plates