Arctic Liquid Freezer Bracket for Instinct MI25
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for installing an Arctic Liquid Freezer pump block on a Vega 10 die like the Instinct MI25
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounting bracket for installing an Arctic Liquid Freezer (first gen.) on an Radeon Instinct MI25. Should fit any other GPUs with 64x64mm hole spacing like Vega 56, Vega 64 and Radeon Pro WX 9100. Might fit other liquid coolers but have not tested.
Printed in PETG, PLA might be too brittle. Designed for heat-set inserts but nuts and washers should work fine too. Install bracket to pump block first before screwing down. Might require a bit of force, it's a tight fit to ensure mounting pressure. Rotate to lock in place. When tightening the screws, make sure to get even pressure and don't overtighten lest you crack the die.
On MI25 specifically (and possibly on other Vega 10 cards too) you need to cut the baseplate with an angle grinder to make the pump block fit. Be careful not to nick the heat pipe. If you forego the baseplate, I strongly suggest installing heatsinks to the VRM mosfets. With base plate still in place at least, direct airflow seems to be unneccessary.