1 / 4
Acoustic panel hook set
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Requirements:
2x M3*12mm bolts with cylindrical hex head (like those from the following set: https://www.amazon.com/Stainless-Steel-Socket-Screws-Assortment/dp/B01N3YT1OZ)
The first thing to do is lock two hook-roots in-between the wooden strips and turn 90 degrees. Than screw the hook-inner into the hook-roots with the two bolts.
Afterwards, slide the hook over the hook-inner, and you're done!
We printed using a Prusa i3 MK3S+ with Tinmorry PETG-GF
- 0.20mm QUALITY
- Prusament PETG settings but with nozzle temp set to 285
- Infill 15%
- Supports:
- Paint on support for the hook with 45°
- Type Organic
- For support enforcers only