1 / 2
Air hockey mallet and puck for small kids table — zdjęcie 1
1 / 2

Air hockey mallet and puck for small kids table

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Air hockey mallet and puck modeled as a replacement for a local elementary schools "air hockey table".

Ocena
5 / 5
Polubienia
10
Pobrania
90
Wydruki
0
Wyświetlenia
198
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I modeled this air hockey mallet/bat/pusher and puck as a replacement for a local elementary school. They have an “air hockey table” which in reality only works with a low friction surface.

I sadly forgot to take photos of the printed parts. I only can provide the one from a failed print with some layer shifting on the top. But the printed parts worked fine.

These parts to not comply to any existing rule set or regulations. I just modeled these parts after the original parts provided to me. The mallet has a diameter of 72mm and the puck has a diameter of 70mm. You can scale the part in the slicer if you want to adjust the dimensions.

Print instructions:
  • No supports needed
  • Recommended layer height 0,2 mm
  • Caution, the part is prone to warping.

 

I would be happy to see some of your makes posted :)

Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.

Tagi