Front covers for Teufel MYND Speaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your MYND look fancy!
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 833
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I love my Teufel MYND (and the open source concept), so I gave it some nice front plates. Use the provided designs or create your own style with the CoverplateEmpty4Remixing.stl.
As the original front is larger than common print areas I made an outer frame (pressfit), which holds the actual cover. In return, that makes it possible to print all parts without supports and use different colors.
Also check out my other Teufel MYND accessories.
Assembly
- Join frame parts and cover before installation on speaker
- The embossed arrows should point upwards (also for installation on speaker)
- Depending on your printers accuracy you may have to join outer frame parts with pliers (pressfit) or use some superglue if it's loose
- Remove the original cover with the 4 screws in the corners
- Screw on your new cover and enjoy :)
Printed in PETG but PLA should work as well. 6 perimeters for outer frame parts recommended. No supports.
I used the CAD files provided by Teufel for measuring and rendering.