Asajj Ventress Collapsing Lightsaber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This version of the lightsaber has been separated into different parts so they can be printed separately and assembled.
- Ocena
- 0 / 5
- Polubienia
- 7
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
This is a multi-part version of her second lightsaber that's split into different stl's so it can be printed in full color with a single color printer and a couple manual filament swaps. The cap screws on so the blades can be printed separately in different colors and inserted or replaced. Included is the adaptor so it can be connected to Darth Mauls Lightsaber.
This version is Saber Plug compatible! This is a print-in-place spring-loaded cap that is printed separately to retain the blades when not in use. The cap positivity locks onto a groove on the ID of the hilt.
There is a 2 color and a 3 color version. Both can be printed with a single color printer with manual filament swap. The “Shield” for the three color version needs supports though, I used organic without issue. The two color version prints with the shield attached to the hilt and does not need supports . You will need a multi-color printer for the three color matrix, but the two color version can be done with a manual filament swap.
For best results use a .4mm nozzle. You can print the blades all at once concentrically or one at a time in vase mode. Find detailed instructions on how to print collapsing swords on my website.
Assembled with Starbond Medium CA Glue (aff.)
Printed on the Prusa XL(aff.) with Polymaker Metallic Pro PLA and Atomic UV Yellow PETG