Bidet Neo 185 - Replacement Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have a bidet, you may find yourself with a broken knob. I had mine crack and replaced it.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a Neo 185 Bidet, after many years of good service, the knob for the water pressure broke, the inner plastic cracked and it no longer fit tight.
It was pretty easy to create this in tinkercad given the dimensions of the old one and the metal post to slide onto.
Print this however you want, I used 30% infill with honeycomb for looks, used PETG will likely reprint later in a more muted silver color vs my initial bright orange. No supports needed for this print. Add extra perimeter walls so your print is strong enough and doesn't flex when turning the knob.