Lego Venator Stand/Wall mount 45 deg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to mount your Lego Venator at an angle for increased viewing pleasure
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 256
- Wydruki
- 1
- Wyświetlenia
- 796
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Sand for the Lego UCS Venator
for your consideration:
>>>Less then 10% of downloaded Models get a like.
→ If you like the design, it will be nice if you click on the like button and maybe share your print.
I printed these in .4mm nozzle .2mm layer PTEG-CF 15% infill 3 exterior walls 5 top/bottom layers, oriented correctly its sized to fit perfectly on a CoreOne plate
uprights and base slide together snugly for anti-wobbily-ness
Base plates have holes for mounting to a wall if desired
I spent a lot of time fine tuning the holes and studs, but every printers different so ive provided the test pieces i made for fitment as well, also included the fitment test pieces for the T? channel
installing these does involve a fair bit of disassembly on the top panels and bridge, but overall not too bad.
Disclaimer: I only ever printed the Right hand version but Ive included the Left hand version as well, It might need tweeks, so you get the step files here too