The Toad Suck Ferry 3D Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Toad Suck Ferry 3D Model is a replica of the famous paddlewheel ferry on the Arkansas River at Conway, Arkansas.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Public Domain
Please visit the project home page for the Toad Suck Ferry model at more more information -
https://dsward2.github.io/ToadSuckFerry/
Toad Suck Ferry 3d printing instructions -
The model was scaled to print on a 300mm x 300mm print bed, but it can be rescaled to different sizes. The model works well with Orca Slicer for 3D printing.
Assembly 1
- Exhaust-Pipe.stl
- Fender-Lower.stl (2x)
- Horns.stl (2x)
- Ramp-Hinge.stl (6x)
- Ramp-Steel.stl (2x)
- Ramp-Wood.stl (2x)
- Toad-Suck-Ferry-Hull.stl
- Wheelhouse-Glass.stl
- Wheelhouse.stl
Suggestions: The Exhaust-Pipe part can be printed with white PLA for the base, and black PLA for the pipe. The Horns part can be printed in white PLA for the base, and silver PLA for the horns. The Wheelhouse-Glass part can be printed in clear transparent PLA. The Wheelhouse part can be printed in white PLA for the roof and windows, and orange for the lower part of the structure.
Assembly 2
- fender-upper.stl (2x)
- lifebouy.stl (6x)
- paddlewheel.stl (2x)
- rail-aft-port.stl
- rail-aft-starboard.stl
- rail-fore-port.stl
- rail-fore-starboard.stl
- rail-paddlewheel-aft.stl (2x)
- rail-paddlewheel-fore.stl (2x)
- rail-port.stl
- rail-starboard.stl
- sign-stop-engine.stl (2x)
- sign-toad-suck-ferry.stl (2x)
Suggestions: Use a slower printing speed for the parts marked as "rail". Use a 0.2mm nozzle for the parts marked as "sign" to improve the legibility of text. The sign parts can be printed with white PLA for the base, and black PLA for the lettering. The lifebouy can be printed in white PLA for the ring, and red PLA for the cross.
Assembly 3
- diamond-tread-plate.stl (2x)
Suggestions: Use a 0.2 nozzle for the diamond-tread-plate part. Print the plate surface layer in orange filament, then switch to black filament for the diamond tread. Use SuperGlue to attach the tread plate to the deck of the ferry's hull.
Assembly 4
- sign-reversable-platform.stl
- toad-suck-ferry-model-sign.stl
Suggestions: The toad-suck-ferry-model-sign can be printed with white PLA for the base, and black PLA for the letters.