Piper CUB RC plane, STEP / DXF, 3D print / Laser Cut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to laser cut from Foam available in almost any "Builders Market". 800mm wingspan "Super Cub" like model
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 218
- Wydruki
- 0
- Wyświetlenia
- 1469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I’m a 3D printing and laser cutting hobbyist, and I wanted to build a lightweight, sub-250g RC plane inspired by the classic Super Cub. While plenty of free plans exist, I found most were either too complex or not optimized for a simple, plug-and-play diode laser workflow.
After reviewing countless PDFs, I decided to design my own straightforward DXF drawings and STEP files for easy replication. No extra frills—just clean, practical plans that work. STEP model provides good base for designing 3d printed accessories for Super Cub Designs.
The finished model has an 800 mm wingspan, and when built from 2–5 mm XPS (without electronics) it comes in at under 75 g.