1 / 2
Full Gyroid Pen Holder - triply periodic minimal surface
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gyroid TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
A gyroid TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this.
Print Settings
Rafts:
No
Supports:
No
Infill:
20
Filament:
/ PLA
Category: Office