1 / 1
Full Diamond Pen Holder - triply periodic minimal surface
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A diamond TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 326
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (13)Powiązane
A diamond TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: Office