Fiber cable tray for Elektro-Plast Elegant 2425-20 IT box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an insert for the Elektro-Plast Elegant IP40 teleinformatics box model multimedia surface-mounted distribution b
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is an insert for the Elektro-Plast Elegant IP40 teleinformatics box model multimedia surface-mounted distribution board 2425-20
It allows for the placement of fiber optic loops, pigtail splices with welded connectors, and hiding them in the telecommunications box
If someone needs to hide a lot of fiber optic cable, they can use both the bottom and the top parts.
For a not-too-long "excess" of fiber optic cables, the top part alone is sufficient
In the upper part, thin bridges are provided (no print supports needed!) at the horizontal elements, with a thickness of 1 layer, which can be very easily removed with a knife after printing, leaving only the thicker part which will stabilize the loops of excess fibers wound aroundIt allows for the placement of fiber optic loops, pigtail splices with appropriate connectors, and hiding them