Bottle Cage for babybay bed side crib.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottle cage addon for babybay bed side crib
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Share Alike
This bottle cage add-on allows you to keep a water bottle (with a maximum diameter of 85 mm) close to your Babybay crib. Simply print two of the 'Babybay_Clamp_inside' parts and one of each of the other two parts.
My parts were printed in eSun PLA+, light brown. They were printed with Gyroid infill (25%) and three perimeters. The design includes built-in reinforcements around the mounting bolt location. Mount at a distance of approx. 15–20 cm.
You will also need two regular M6 nuts and two M6x40 wafer-head screws. Cylindrical screws with a washer should also work, but this may slightly decrease the maximum water bottle diameter.