Dial indicator holder for Snapmaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dial indicator holder for Snapmaker 3-in-1 machines.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 65
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a dial indicator holder for Snapmaker 3-in-1 machines.
Fits standard dial indicators with a rear mounting bracket.
The holes in the holder are designed for ruthex M4 heatset inserts (5 pieces D5.6 L8.1) - however, heatset inserts from other manufacturers with a similar diameter should also fit.
Five M4 cylinder head screws (L approx. 15-20 mm) are required for attachment if the bracing plate is attached to the toolhead slider.
The holder should also be usable with correspondingly shorter screws without the bracing plate installed - but I haven't tested this.
Furthermore, the holder can of course also be mounted without heatset inserts using the appropriate screws, nuts, and washers.
Printed in Extrudr PETG - 0.5 Nozzle - 0.25 Layer - 4 Perimeter - 60% Gyroid