Fan shroud ender 3 Satsana Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More clearance for non planar printing, Ender 3 / V2 / Pro
- Ocena
- 4,2 / 5
- Polubienia
- 33
- Pobrania
- 344
- Wydruki
- 10
- Wyświetlenia
- 3630
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Hey there.
I recently got in to non planar 3D-printing. Therefore I needed a bit more clearance between the nozzle and shroud.
I liked the Satsana shroud for the Ender 3 / V2 / Pro and just edited the file for about 6 mm clearance. (should be sufficient for most non-planar prints)
BL-touch is not supported, because the BL-Touch version does not allow remixes.
Original file: https://www.thingiverse.com/thing:4369859
Original for BL-Touch: https://www.prusaprinters.org/prints/58601-satsana-ender3-bltouch-fixed
Print settings:
Nozzle: 0.4
Layers: 0.2
Supports: none
(Make sure you can print the 45° overhangs and 16 mm bridges; line direction for bridging needs to be adjusted!)
Material: PLA (PETG, ABS, ASA, PEEK recommended)
Bed Adhesion: Brim 5 mm (outside)
Brim Distance: 0.05 mm (for better seperating)