1 / 3
Roller for Belttensioner - GT Omega Bucket Seat
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roller for belt tensioners for easy attachment on a bucket seat
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (1)Kolekcje (18)Powiązane
These Rollers serve to reduce any Friction between Belt and Seat. Especially designed for GT Omega Bucket Seats with an angled cut out for the Belt.
The Spacer is used between Roller and Bearing, you can also use two washer on each side instead.
Additional Parts:
4x Ball Bearing 635 5x19x6mm
4x M5 HeatInserts
4x M5x16mm
2026/07/23: New Files. The Bearings will be pushed in from the outside now, this makes it more rigid. Therefore the Spacer has to be 1mm thicker.