Aire Mod for UPPATVIND Filter - Small Printer Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of thrutheframe's activated carbon mod for the Ikea Uppatvind filter, now w/ a four-piece frame for small printers
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Introduction
This remix makes the frame of the UPPATVIND Carbon Mod printable on a printer with a bed as small as 140 mm x 120 mm. This doesn't change the fact that you need a bigger printer to print the cartridges, but this still makes it printable on certain printers e. g. the Ender-3 range.
What you need
All 4 parts of the frame
3 small & 2 large H-Joints
2 M3x8 screws and 2 M3 nuts
Assebly
There is an instruction on how to assemble in the images. Just go step by step as shown.
If this helped you, a like would be appreciated. Happy Printing!