Yeti High/Tall Handle 30oz (Originally designed for newer Ford F-150 cupholder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Should fit 30oz Yeti/Ozark Trail cups. Depending on the orientation you print, the handle is higher or lower. Ford F-150
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is my first 3d stl design/remix I'm posting. Just bought a 2022 Ford F-150, and the front passenger cup holders prevented my current 3D printed Yeti handles from working because they were too long and prevented the cup from firmly sitting in the holder.
This handle should fit most 30 oz Yeti/Ozark Trail and similar cups (I tried a bunch). Depending on which orientation you put it on your cup, the handle will be slightly lower or higher. One may work better for you than the other. I prefer mine with the handle top higher than the lid so I can easily grab the handle with the center console in the way. However, both orientations will work in my F-150; one is just easier to grab. The photos show the two different orientations of the handle.