1 / 3
Revopoint Trackit / Trackit SR Tripod Stiffener to prevent unwanted fold ups — zdjęcie 1
1 / 3

Revopoint Trackit / Trackit SR Tripod Stiffener to prevent unwanted fold ups

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

In some occasions the tripod legs folded to the middle while moving the scanner. This design prevents this issue.

Ocena
0 / 5
Polubienia
3
Pobrania
21
Wydruki
0
Wyświetlenia
136
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Update: Also works with the Trackit SR

Also look at my other designs for the Trackit, like the scanner hanger or powerbank mount!

This design was created to eliminate the issue that the tripod legs don't lock for further extension to the middle. When moving the tracker around I had some unpleasant moments where they completely folded to the center.
The design is small enough to still fit in the original case.

Printing

Select your most rigid filament and then aim for a few mm wall thickness and at least 40% infill. I used PETG CF for extra rigidity and it performs well. Normal PETG had too much flex.

Assembly

Fix the printed part with 3 5mm zip-ties or metal wire to the tripod and enjoy the stiffness of the tripod-legs. Zip-ties can be up to 1.5mm thick.

Tagi