1 / 2
FTC Vectored Intake Wheels Rev 5mm / gobilda 8mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapted version of the vectored intake wheels to fit a 5mm hex shaft (rev) or a 8mm hex shaft (gobilda). Uses M4
- Ocena
- 4 / 5
- Polubienia
- 52
- Pobrania
- 1814
- Wydruki
- 1
- Wyświetlenia
- 5389
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (58)Powiązane
An adapted version of the vectored intake wheels to use in FTC with 5mm hex rev shaft. Use of m4 inserts with heat set inserts to pack them close together.
