Cubic moss planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a cute little planter I made. I have no idea if it'll work because my abilities at keeping plants alive…
- Ocena
- 0 / 5
- Polubienia
- 126
- Pobrania
- 209
- Wydruki
- 0
- Wyświetlenia
- 1514
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
This is just a cute little planter I made. I have no idea if it'll work because my abilities at keeping plants alive are exceptionally low I made it for moss but really you could use any little plant. You could scale it up or down too If you have a suggestion for another style of planter lemme know
Suggested print settings are: Print file in 1 piece, oriented right side up (with the large flat side down). Print with standard quality (layer height 0.2 mm) unless you want a finer finish. Use any old auto-generated supports your slicer makes. Tree supports in Flashprint suck pretty bad so I just used regular square supports. Print temp varies on what you're printing with but I used 225-nozzle and 60-bed for standard PLA. Print speed really doesn't matter.
Category: Art