19" Raspberry Pi Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully printed or partly CNCed 19" Raspberry Pi Rack Mount for up to 5 Pis.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 719
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
1U Rack Mount for up to 5 Rasberry PIs .
Options for partly 3D printed / CNCed and fully printed (Images are from my part and part version).
Blanking plates and a POE power supply trays included.
The pin is only required for the printed version, its slides into a slot at the middle back to stop the dove tail from coming loose.
Depending on yout printer the dove tail joint may be very tight, hammer it in if required, tight is good.
Requires 10X M4 countersunk screws (8mm or longer) and 12X M3 8mm or longer for the cnc version.
Fusion files included for the CNC version and tool paths